Bellow sealed angle valve VE, stainless steel, KF DN 16

Bellow sealed angle valve VE,
stainless steel, KF DN 16 High vacuum, helium leak-tested right angle valves VE have stainless steel bellows which seals the drive mechanism without any gap on the vacuum side. Due to the screw-thread mechanism, these valves offer a certain control of conductance. They are mountable in any position because of their air tightness in both positions. The body is either made of solid aluminum or stainless steel (VE WIG). The stainless steel valves are tungsten inert gas welded from the inside for maximum gas tightness and minimum degassing rates.
The VS und VS C series valves from VACUUBRAND are butterfly-type valves.
The VS und VS C series valves from VACUUBRAND are butterfly-type valves. A circular valve plate with a sealing ring on the circumference rotates around an axis at right angle to the valve axis. As a result, the valves leave virtually the entire cross section free, offering very good conductance.
• high conductance due to large stroke length
• excellent gas tightness, minimum degassing
• stainless steel version VE WIG bakeable to +150 °C
• simple dismantling and easy changing of seal
• dimensions of the VE valve are the same as elbow with corresponding nominal width